$ make upload
-------------------------
Arduino.mk Configuration:
- [AUTODETECTED]       CURRENT_OS = LINUX 
- [COMPUTED]           ARDMK_DIR = /$HOME/$ADIR (relative to Common.mk)
- [AUTODETECTED]       ARDUINO_DIR = /usr/share/arduino 
- [AUTODETECTED]       ARDUINO_VERSION = 105 
- [AUTODETECTED]       ARDUINO_PREFERENCES_PATH = /$HOME/.arduino/preferences.txt 
- [AUTODETECTED]       ARDUINO_SKETCHBOOK = /$HOME/sketchbook (from arduino preferences file)
- [BUNDLED]            AVR_TOOLS_DIR = /usr/share/arduino/hardware/tools/avr (in Arduino distribution)
- [COMPUTED]           ARDUINO_LIB_PATH = /usr/share/arduino/libraries (from ARDUINO_DIR)
- [DEFAULT]            ARDUINO_CORE_PATH = /usr/share/arduino/hardware/arduino/cores/arduino 
- [COMPUTED]           ARDUINO_VAR_PATH = /usr/share/arduino/hardware/arduino/variants (from ARDUINO_DIR)
- [COMPUTED]           BOARDS_TXT = /usr/share/arduino/hardware/arduino/boards.txt (from ARDUINO_DIR)
- [DEFAULT]            USER_LIB_PATH = /$HOME/sketchbook/libraries (in user sketchbook)
- [USER]               BOARD_TAG = uno 
- [COMPUTED]           OBJDIR = build-uno (from BOARD_TAG)
- [ASSUMED]            MONITOR_BAUDRATE = 9600 
- [DEFAULT]            OPTIMIZATION_LEVEL = s 
- [DEFAULT]            MCU_FLAG_NAME = mmcu 
- [DEFAULT]            CFLAGS_STD = -std=gnu99 
- [AUTODETECTED]       Size utility: AVR-aware for enhanced output
- [COMPUTED]           BOOTLOADER_PARENT = /usr/share/arduino/hardware/arduino/bootloaders (from ARDUINO_DIR)
-------------------------
make reset
make[1]: ディレクトリ `/$HOME/$SRC_DIR' に入ります
/usr/bin/ard-reset-arduino  /dev/ttyACM0
make[1]: ディレクトリ `/$HOME/$SRC_DIR' から出ます
make do_upload
make[1]: ディレクトリ `/$HOME/$SRC_DIR' に入ります
/usr/share/arduino/hardware/tools/avr/../avrdude -q -V -D -p atmega328p -C /usr/share/arduino/hardware/tools/avr/../avrdude.conf -c arduino -b 115200 -P /dev/ttyACM0 \
			-U flash:w:build-uno/$PROGRAM.hex:i

avrdude: AVR device initialized and ready to accept instructions
avrdude: Device signature = 0x1e950f
avrdude: reading input file "build-uno/$PROGRAM.hex"
avrdude: writing flash (1024 bytes):
avrdude: 1024 bytes of flash written

avrdude: safemode: Fuses OK (H:00, E:00, L:00)

avrdude done.  Thank you.

make[1]: ディレクトリ `/$HOME/$SRC_DIR' から出ます