353a354,1672
> usb 4-4: new high speed USB device using ehci_hcd and address 2
> usb 4-4: configuration #1 chosen from 1 choice
> usbcore: registered new interface driver libusual
> SCSI subsystem initialized
> Initializing USB Mass Storage driver...
> usb-storage: USB Mass Storage device detected
> usb-storage: -- associate_dev
> usb-storage: Vendor: 0x05e3, Product: 0x0702, Revision: 0x0033
> usb-storage: Interface Subclass: 0x06, Protocol: 0x50
> usb-storage: Transport: Bulk
> usb-storage: Protocol: Transparent SCSI
> scsi0 : SCSI emulation for USB Mass Storage devices
> usb-storage: *** thread sleeping.
> usb-storage: device found at 2
> usb-storage: waiting for device to settle before scanning
> usbcore: registered new interface driver usb-storage
> USB Mass Storage support registered.
> usb-storage: usb_stor_control_msg: rq=fe rqtype=a1 value=0000 index=00 len=1
> usb-storage: GetMaxLUN command result is 1, data is 0
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Command INQUIRY (6 bytes)
> usb-storage:  12 00 00 00 24 00
> usb-storage: Bulk Command S 0x43425355 T 0x1 L 36 F 128 Trg 0 LUN 0 CL 6
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: usb_stor_bulk_transfer_sglist: xfer 36 bytes, 1 entries
> usb-storage: Status code 0; transferred 36/36
> usb-storage: -- transfer complete
> usb-storage: Bulk data transfer result 0x0
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0x1 R 0 Stat 0x0
> usb-storage: scsi cmd done, result=0x0
> usb-storage: *** thread sleeping.
> scsi 0:0:0:0: Direct-Access     HTS72106 0G9AT00          0811 PQ: 0 ANSI: 0
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Bad target number (1:0)
> usb-storage: scsi cmd done, result=0x40000
> usb-storage: *** thread sleeping.
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Bad target number (2:0)
> usb-storage: scsi cmd done, result=0x40000
> usb-storage: *** thread sleeping.
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Bad target number (3:0)
> usb-storage: scsi cmd done, result=0x40000
> usb-storage: *** thread sleeping.
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Bad target number (4:0)
> usb-storage: scsi cmd done, result=0x40000
> usb-storage: *** thread sleeping.
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Bad target number (5:0)
> usb-storage: scsi cmd done, result=0x40000
> usb-storage: *** thread sleeping.
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Bad target number (6:0)
> usb-storage: scsi cmd done, result=0x40000
> usb-storage: *** thread sleeping.
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Bad target number (7:0)
> usb-storage: scsi cmd done, result=0x40000
> usb-storage: *** thread sleeping.
> usb-storage: device scan complete
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Command TEST_UNIT_READY (6 bytes)
> usb-storage:  00 00 00 00 00 00
> usb-storage: Bulk Command S 0x43425355 T 0x2 L 0 F 0 Trg 0 LUN 0 CL 6
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0x2 R 0 Stat 0x0
> usb-storage: scsi cmd done, result=0x0
> usb-storage: *** thread sleeping.
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Command READ_CAPACITY (10 bytes)
> usb-storage:  25 00 00 00 00 00 00 00 00 00
> usb-storage: Bulk Command S 0x43425355 T 0x3 L 8 F 128 Trg 0 LUN 0 CL 10
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: usb_stor_bulk_transfer_sglist: xfer 8 bytes, 1 entries
> usb-storage: Status code 0; transferred 8/8
> usb-storage: -- transfer complete
> usb-storage: Bulk data transfer result 0x0
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0x3 R 0 Stat 0x0
> usb-storage: scsi cmd done, result=0x0
> usb-storage: *** thread sleeping.
> sd 0:0:0:0: [sda] 107458785 512-byte hardware sectors (55019 MB)
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Command MODE_SENSE (6 bytes)
> usb-storage:  1a 00 3f 00 c0 00
> usb-storage: Bulk Command S 0x43425355 T 0x4 L 192 F 128 Trg 0 LUN 0 CL 6
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: usb_stor_bulk_transfer_sglist: xfer 192 bytes, 1 entries
> usb-storage: Status code -32; transferred 0/192
> usb-storage: clearing endpoint halt for pipe 0xc0008280
> usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=81 len=0
> usb-storage: usb_stor_clear_halt: result = 0
> usb-storage: Bulk data transfer result 0x2
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0x4 R 192 Stat 0x1
> usb-storage: -- transport indicates command failure
> usb-storage: Issuing auto-REQUEST_SENSE
> usb-storage: Bulk Command S 0x43425355 T 0x5 L 18 F 128 Trg 0 LUN 0 CL 6
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes
> usb-storage: Status code 0; transferred 18/18
> usb-storage: -- transfer complete
> usb-storage: Bulk data transfer result 0x0
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0x5 R 0 Stat 0x0
> usb-storage: -- Result from auto-sense is 0
> usb-storage: -- code: 0x70, key: 0x5, ASC: 0x24, ASCQ: 0x0
> usb-storage: (Unknown Key): (unknown ASC/ASCQ)
> usb-storage: scsi cmd done, result=0x2
> usb-storage: *** thread sleeping.
> sd 0:0:0:0: [sda] Test WP failed, assume Write Enabled
> sd 0:0:0:0: [sda] Assuming drive cache: write through
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Command TEST_UNIT_READY (6 bytes)
> usb-storage:  00 00 00 00 00 00
> usb-storage: Bulk Command S 0x43425355 T 0x6 L 0 F 0 Trg 0 LUN 0 CL 6
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0x6 R 0 Stat 0x0
> usb-storage: scsi cmd done, result=0x0
> usb-storage: *** thread sleeping.
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Command READ_CAPACITY (10 bytes)
> usb-storage:  25 00 00 00 00 00 00 00 00 00
> usb-storage: Bulk Command S 0x43425355 T 0x7 L 8 F 128 Trg 0 LUN 0 CL 10
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: usb_stor_bulk_transfer_sglist: xfer 8 bytes, 1 entries
> usb-storage: Status code 0; transferred 8/8
> usb-storage: -- transfer complete
> usb-storage: Bulk data transfer result 0x0
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0x7 R 0 Stat 0x0
> usb-storage: scsi cmd done, result=0x0
> usb-storage: *** thread sleeping.
> sd 0:0:0:0: [sda] 107458785 512-byte hardware sectors (55019 MB)
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Command MODE_SENSE (6 bytes)
> usb-storage:  1a 00 3f 00 c0 00
> usb-storage: Bulk Command S 0x43425355 T 0x8 L 192 F 128 Trg 0 LUN 0 CL 6
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: usb_stor_bulk_transfer_sglist: xfer 192 bytes, 1 entries
> usb-storage: Status code -32; transferred 0/192
> usb-storage: clearing endpoint halt for pipe 0xc0008280
> usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=81 len=0
> usb-storage: usb_stor_clear_halt: result = 0
> usb-storage: Bulk data transfer result 0x2
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0x8 R 192 Stat 0x1
> usb-storage: -- transport indicates command failure
> usb-storage: Issuing auto-REQUEST_SENSE
> usb-storage: Bulk Command S 0x43425355 T 0x9 L 18 F 128 Trg 0 LUN 0 CL 6
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes
> usb-storage: Status code 0; transferred 18/18
> usb-storage: -- transfer complete
> usb-storage: Bulk data transfer result 0x0
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0x9 R 0 Stat 0x0
> usb-storage: -- Result from auto-sense is 0
> usb-storage: -- code: 0x70, key: 0x5, ASC: 0x24, ASCQ: 0x0
> usb-storage: (Unknown Key): (unknown ASC/ASCQ)
> usb-storage: scsi cmd done, result=0x2
> usb-storage: *** thread sleeping.
> sd 0:0:0:0: [sda] Test WP failed, assume Write Enabled
> sd 0:0:0:0: [sda] Assuming drive cache: write through
>  sda:<7>usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Command READ_10 (10 bytes)
> usb-storage:  28 00 00 00 00 00 00 00 08 00
> usb-storage: Bulk Command S 0x43425355 T 0xa L 4096 F 128 Trg 0 LUN 0 CL 10
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
> usb-storage: Status code 0; transferred 4096/4096
> usb-storage: -- transfer complete
> usb-storage: Bulk data transfer result 0x0
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0xa R 0 Stat 0x0
> usb-storage: scsi cmd done, result=0x0
> usb-storage: *** thread sleeping.
>  sda1 sda2 sda3
> sd 0:0:0:0: [sda] Attached SCSI disk
> sd 0:0:0:0: Attached scsi generic sg0 type 0
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Command READ_10 (10 bytes)
> usb-storage:  28 00 06 67 b0 00 00 00 08 00
> usb-storage: Bulk Command S 0x43425355 T 0xb L 4096 F 128 Trg 0 LUN 0 CL 10
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
> usb-storage: Status code 0; transferred 4096/4096
> usb-storage: -- transfer complete
> usb-storage: Bulk data transfer result 0x0
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0xb R 0 Stat 0x0
> usb-storage: scsi cmd done, result=0x0
> usb-storage: *** thread sleeping.
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Command READ_10 (10 bytes)
> usb-storage:  28 00 00 00 00 00 00 00 08 00
> usb-storage: Bulk Command S 0x43425355 T 0xc L 4096 F 128 Trg 0 LUN 0 CL 10
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
> usb-storage: Status code 0; transferred 4096/4096
> usb-storage: -- transfer complete
> usb-storage: Bulk data transfer result 0x0
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0xc R 0 Stat 0x0
> usb-storage: scsi cmd done, result=0x0
> usb-storage: *** thread sleeping.
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Command READ_10 (10 bytes)
> usb-storage:  28 00 00 00 00 08 00 00 20 00
> usb-storage: Bulk Command S 0x43425355 T 0xd L 16384 F 128 Trg 0 LUN 0 CL 10
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: usb_stor_bulk_transfer_sglist: xfer 16384 bytes, 4 entries
> usb-storage: Status code 0; transferred 16384/16384
> usb-storage: -- transfer complete
> usb-storage: Bulk data transfer result 0x0
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0xd R 0 Stat 0x0
> usb-storage: scsi cmd done, result=0x0
> usb-storage: *** thread sleeping.
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Command READ_10 (10 bytes)
> usb-storage:  28 00 06 67 b0 e0 00 00 01 00
> usb-storage: Bulk Command S 0x43425355 T 0xe L 512 F 128 Trg 0 LUN 0 CL 10
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries
> usb-storage: Status code 0; transferred 512/512
> usb-storage: -- transfer complete
> usb-storage: Bulk data transfer result 0x0
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0xe R 0 Stat 0x0
> usb-storage: scsi cmd done, result=0x0
> usb-storage: *** thread sleeping.
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Command READ_10 (10 bytes)
> usb-storage:  28 00 06 67 b0 d8 00 00 08 00
> usb-storage: Bulk Command S 0x43425355 T 0xf L 4096 F 128 Trg 0 LUN 0 CL 10
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
> usb-storage: Status code 0; transferred 4096/4096
> usb-storage: -- transfer complete
> usb-storage: Bulk data transfer result 0x0
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0xf R 0 Stat 0x0
> usb-storage: scsi cmd done, result=0x0
> usb-storage: *** thread sleeping.
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Command READ_10 (10 bytes)
> usb-storage:  28 00 06 67 b0 a0 00 00 08 00
> usb-storage: Bulk Command S 0x43425355 T 0x10 L 4096 F 128 Trg 0 LUN 0 CL 10
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
> usb-storage: Status code 0; transferred 4096/4096
> usb-storage: -- transfer complete
> usb-storage: Bulk data transfer result 0x0
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0x10 R 0 Stat 0x0
> usb-storage: scsi cmd done, result=0x0
> usb-storage: *** thread sleeping.
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Command READ_10 (10 bytes)
> usb-storage:  28 00 06 67 af e0 00 00 08 00
> usb-storage: Bulk Command S 0x43425355 T 0x11 L 4096 F 128 Trg 0 LUN 0 CL 10
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
> usb-storage: Status code 0; transferred 4096/4096
> usb-storage: -- transfer complete
> usb-storage: Bulk data transfer result 0x0
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0x11 R 0 Stat 0x0
> usb-storage: scsi cmd done, result=0x0
> usb-storage: *** thread sleeping.
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Command READ_10 (10 bytes)
> usb-storage:  28 00 06 67 b0 d0 00 00 08 00
> usb-storage: Bulk Command S 0x43425355 T 0x12 L 4096 F 128 Trg 0 LUN 0 CL 10
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
> usb-storage: Status code 0; transferred 4096/4096
> usb-storage: -- transfer complete
> usb-storage: Bulk data transfer result 0x0
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0x12 R 0 Stat 0x0
> usb-storage: scsi cmd done, result=0x0
> usb-storage: *** thread sleeping.
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Command READ_10 (10 bytes)
> usb-storage:  28 00 06 67 af 50 00 00 08 00
> usb-storage: Bulk Command S 0x43425355 T 0x13 L 4096 F 128 Trg 0 LUN 0 CL 10
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
> usb-storage: Status code 0; transferred 4096/4096
> usb-storage: -- transfer complete
> usb-storage: Bulk data transfer result 0x0
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0x13 R 0 Stat 0x0
> usb-storage: scsi cmd done, result=0x0
> usb-storage: *** thread sleeping.
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Command READ_10 (10 bytes)
> usb-storage:  28 00 00 00 00 28 00 00 40 00
> usb-storage: Bulk Command S 0x43425355 T 0x14 L 32768 F 128 Trg 0 LUN 0 CL 10
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: usb_stor_bulk_transfer_sglist: xfer 32768 bytes, 5 entries
> usb-storage: Status code 0; transferred 32768/32768
> usb-storage: -- transfer complete
> usb-storage: Bulk data transfer result 0x0
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0x14 R 0 Stat 0x0
> usb-storage: scsi cmd done, result=0x0
> usb-storage: *** thread sleeping.
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Command READ_10 (10 bytes)
> usb-storage:  28 00 00 00 00 68 00 00 20 00
> usb-storage: Bulk Command S 0x43425355 T 0x15 L 16384 F 128 Trg 0 LUN 0 CL 10
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: usb_stor_bulk_transfer_sglist: xfer 16384 bytes, 2 entries
> usb-storage: Status code 0; transferred 16384/16384
> usb-storage: -- transfer complete
> usb-storage: Bulk data transfer result 0x0
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0x15 R 0 Stat 0x0
> usb-storage: scsi cmd done, result=0x0
> usb-storage: *** thread sleeping.
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Command READ_10 (10 bytes)
> usb-storage:  28 00 00 00 02 00 00 00 08 00
> usb-storage: Bulk Command S 0x43425355 T 0x16 L 4096 F 128 Trg 0 LUN 0 CL 10
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
> usb-storage: Status code 0; transferred 4096/4096
> usb-storage: -- transfer complete
> usb-storage: Bulk data transfer result 0x0
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0x16 R 0 Stat 0x0
> usb-storage: scsi cmd done, result=0x0
> usb-storage: *** thread sleeping.
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Command READ_10 (10 bytes)
> usb-storage:  28 00 00 7a 51 3f 00 00 08 00
> usb-storage: Bulk Command S 0x43425355 T 0x17 L 4096 F 128 Trg 0 LUN 0 CL 10
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
> usb-storage: Status code 0; transferred 4096/4096
> usb-storage: -- transfer complete
> usb-storage: Bulk data transfer result 0x0
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0x17 R 0 Stat 0x0
> usb-storage: scsi cmd done, result=0x0
> usb-storage: *** thread sleeping.
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Command READ_10 (10 bytes)
> usb-storage:  28 00 00 ab 97 33 00 00 08 00
> usb-storage: Bulk Command S 0x43425355 T 0x18 L 4096 F 128 Trg 0 LUN 0 CL 10
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
> usb-storage: Status code 0; transferred 4096/4096
> usb-storage: -- transfer complete
> usb-storage: Bulk data transfer result 0x0
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0x18 R 0 Stat 0x0
> usb-storage: scsi cmd done, result=0x0
> usb-storage: *** thread sleeping.
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Command READ_10 (10 bytes)
> usb-storage:  28 00 01 6f b2 3c 00 00 08 00
> usb-storage: Bulk Command S 0x43425355 T 0x19 L 4096 F 128 Trg 0 LUN 0 CL 10
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
> usb-storage: Status code 0; transferred 4096/4096
> usb-storage: -- transfer complete
> usb-storage: Bulk data transfer result 0x0
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0x19 R 0 Stat 0x0
> usb-storage: scsi cmd done, result=0x0
> usb-storage: *** thread sleeping.
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Command READ_10 (10 bytes)
> usb-storage:  28 00 00 00 00 3f 00 00 08 00
> usb-storage: Bulk Command S 0x43425355 T 0x1a L 4096 F 128 Trg 0 LUN 0 CL 10
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
> usb-storage: Status code 0; transferred 4096/4096
> usb-storage: -- transfer complete
> usb-storage: Bulk data transfer result 0x0
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0x1a R 0 Stat 0x0
> usb-storage: scsi cmd done, result=0x0
> usb-storage: *** thread sleeping.
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Command READ_10 (10 bytes)
> usb-storage:  28 00 00 7a 52 33 00 00 08 00
> usb-storage: Bulk Command S 0x43425355 T 0x1b L 4096 F 128 Trg 0 LUN 0 CL 10
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
> usb-storage: Status code 0; transferred 4096/4096
> usb-storage: -- transfer complete
> usb-storage: Bulk data transfer result 0x0
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0x1b R 0 Stat 0x0
> usb-storage: scsi cmd done, result=0x0
> usb-storage: *** thread sleeping.
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Command READ_10 (10 bytes)
> usb-storage:  28 00 00 ab 97 bc 00 00 08 00
> usb-storage: Bulk Command S 0x43425355 T 0x1c L 4096 F 128 Trg 0 LUN 0 CL 10
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
> usb-storage: Status code 0; transferred 4096/4096
> usb-storage: -- transfer complete
> usb-storage: Bulk data transfer result 0x0
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0x1c R 0 Stat 0x0
> usb-storage: scsi cmd done, result=0x0
> usb-storage: *** thread sleeping.
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Command READ_10 (10 bytes)
> usb-storage:  28 00 00 00 00 47 00 00 20 00
> usb-storage: Bulk Command S 0x43425355 T 0x1d L 16384 F 128 Trg 0 LUN 0 CL 10
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: usb_stor_bulk_transfer_sglist: xfer 16384 bytes, 1 entries
> usb-storage: Status code 0; transferred 16384/16384
> usb-storage: -- transfer complete
> usb-storage: Bulk data transfer result 0x0
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0x1d R 0 Stat 0x0
> usb-storage: scsi cmd done, result=0x0
> usb-storage: *** thread sleeping.
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Command READ_10 (10 bytes)
> usb-storage:  28 00 00 7a 52 2f 00 00 04 00
> usb-storage: Bulk Command S 0x43425355 T 0x1e L 2048 F 128 Trg 0 LUN 0 CL 10
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: usb_stor_bulk_transfer_sglist: xfer 2048 bytes, 1 entries
> usb-storage: Status code 0; transferred 2048/2048
> usb-storage: -- transfer complete
> usb-storage: Bulk data transfer result 0x0
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0x1e R 0 Stat 0x0
> usb-storage: scsi cmd done, result=0x0
> usb-storage: *** thread sleeping.
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Command READ_10 (10 bytes)
> usb-storage:  28 00 00 7a 52 3b 00 00 20 00
> usb-storage: Bulk Command S 0x43425355 T 0x1f L 16384 F 128 Trg 0 LUN 0 CL 10
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: usb_stor_bulk_transfer_sglist: xfer 16384 bytes, 1 entries
> usb-storage: Status code 0; transferred 16384/16384
> usb-storage: -- transfer complete
> usb-storage: Bulk data transfer result 0x0
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0x1f R 0 Stat 0x0
> usb-storage: scsi cmd done, result=0x0
> usb-storage: *** thread sleeping.
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Command READ_10 (10 bytes)
> usb-storage:  28 00 00 ab 97 c4 00 00 20 00
> usb-storage: Bulk Command S 0x43425355 T 0x20 L 16384 F 128 Trg 0 LUN 0 CL 10
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: usb_stor_bulk_transfer_sglist: xfer 16384 bytes, 1 entries
> usb-storage: Status code 0; transferred 16384/16384
> usb-storage: -- transfer complete
> usb-storage: Bulk data transfer result 0x0
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0x20 R 0 Stat 0x0
> usb-storage: scsi cmd done, result=0x0
> usb-storage: *** thread sleeping.
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Command READ_10 (10 bytes)
> usb-storage:  28 00 00 7a 51 ef 00 00 08 00
> usb-storage: Bulk Command S 0x43425355 T 0x21 L 4096 F 128 Trg 0 LUN 0 CL 10
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
> usb-storage: Status code 0; transferred 4096/4096
> usb-storage: -- transfer complete
> usb-storage: Bulk data transfer result 0x0
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0x21 R 0 Stat 0x0
> usb-storage: scsi cmd done, result=0x0
> usb-storage: *** thread sleeping.
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Command READ_10 (10 bytes)
> usb-storage:  28 00 00 7a 51 2f 00 00 04 00
> usb-storage: Bulk Command S 0x43425355 T 0x22 L 2048 F 128 Trg 0 LUN 0 CL 10
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: usb_stor_bulk_transfer_sglist: xfer 2048 bytes, 1 entries
> usb-storage: Status code 0; transferred 2048/2048
> usb-storage: -- transfer complete
> usb-storage: Bulk data transfer result 0x0
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0x22 R 0 Stat 0x0
> usb-storage: scsi cmd done, result=0x0
> usb-storage: *** thread sleeping.
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Command READ_10 (10 bytes)
> usb-storage:  28 00 00 7a 51 33 00 00 04 00
> usb-storage: Bulk Command S 0x43425355 T 0x23 L 2048 F 128 Trg 0 LUN 0 CL 10
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: usb_stor_bulk_transfer_sglist: xfer 2048 bytes, 1 entries
> usb-storage: Status code 0; transferred 2048/2048
> usb-storage: -- transfer complete
> usb-storage: Bulk data transfer result 0x0
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0x23 R 0 Stat 0x0
> usb-storage: scsi cmd done, result=0x0
> usb-storage: *** thread sleeping.
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Command READ_10 (10 bytes)
> usb-storage:  28 00 00 7a 52 1f 00 00 04 00
> usb-storage: Bulk Command S 0x43425355 T 0x24 L 2048 F 128 Trg 0 LUN 0 CL 10
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: usb_stor_bulk_transfer_sglist: xfer 2048 bytes, 1 entries
> usb-storage: Status code 0; transferred 2048/2048
> usb-storage: -- transfer complete
> usb-storage: Bulk data transfer result 0x0
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0x24 R 0 Stat 0x0
> usb-storage: scsi cmd done, result=0x0
> usb-storage: *** thread sleeping.
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Command READ_10 (10 bytes)
> usb-storage:  28 00 00 7a 52 23 00 00 04 00
> usb-storage: Bulk Command S 0x43425355 T 0x25 L 2048 F 128 Trg 0 LUN 0 CL 10
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: usb_stor_bulk_transfer_sglist: xfer 2048 bytes, 1 entries
> usb-storage: Status code 0; transferred 2048/2048
> usb-storage: -- transfer complete
> usb-storage: Bulk data transfer result 0x0
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0x25 R 0 Stat 0x0
> usb-storage: scsi cmd done, result=0x0
> usb-storage: *** thread sleeping.
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Command READ_10 (10 bytes)
> usb-storage:  28 00 00 ab 97 bb 00 00 01 00
> usb-storage: Bulk Command S 0x43425355 T 0x26 L 512 F 128 Trg 0 LUN 0 CL 10
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries
> usb-storage: Status code 0; transferred 512/512
> usb-storage: -- transfer complete
> usb-storage: Bulk data transfer result 0x0
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0x26 R 0 Stat 0x0
> usb-storage: scsi cmd done, result=0x0
> usb-storage: *** thread sleeping.
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Command READ_10 (10 bytes)
> usb-storage:  28 00 00 ab 97 b3 00 00 01 00
> usb-storage: Bulk Command S 0x43425355 T 0x27 L 512 F 128 Trg 0 LUN 0 CL 10
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries
> usb-storage: Status code 0; transferred 512/512
> usb-storage: -- transfer complete
> usb-storage: Bulk data transfer result 0x0
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0x27 R 0 Stat 0x0
> usb-storage: scsi cmd done, result=0x0
> usb-storage: *** thread sleeping.
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Command READ_10 (10 bytes)
> usb-storage:  28 00 00 ab 97 b4 00 00 01 00
> usb-storage: Bulk Command S 0x43425355 T 0x28 L 512 F 128 Trg 0 LUN 0 CL 10
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries
> usb-storage: Status code 0; transferred 512/512
> usb-storage: -- transfer complete
> usb-storage: Bulk data transfer result 0x0
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0x28 R 0 Stat 0x0
> usb-storage: scsi cmd done, result=0x0
> usb-storage: *** thread sleeping.
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Command READ_10 (10 bytes)
> usb-storage:  28 00 00 ab 97 b5 00 00 06 00
> usb-storage: Bulk Command S 0x43425355 T 0x29 L 3072 F 128 Trg 0 LUN 0 CL 10
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: usb_stor_bulk_transfer_sglist: xfer 3072 bytes, 1 entries
> usb-storage: Status code 0; transferred 3072/3072
> usb-storage: -- transfer complete
> usb-storage: Bulk data transfer result 0x0
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0x29 R 0 Stat 0x0
> usb-storage: scsi cmd done, result=0x0
> usb-storage: *** thread sleeping.
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Command READ_10 (10 bytes)
> usb-storage:  28 00 00 ab 97 7b 00 00 01 00
> usb-storage: Bulk Command S 0x43425355 T 0x2a L 512 F 128 Trg 0 LUN 0 CL 10
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries
> usb-storage: Status code 0; transferred 512/512
> usb-storage: -- transfer complete
> usb-storage: Bulk data transfer result 0x0
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0x2a R 0 Stat 0x0
> usb-storage: scsi cmd done, result=0x0
> usb-storage: *** thread sleeping.
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Command READ_10 (10 bytes)
> usb-storage:  28 00 00 ab 97 7c 00 00 01 00
> usb-storage: Bulk Command S 0x43425355 T 0x2b L 512 F 128 Trg 0 LUN 0 CL 10
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries
> usb-storage: Status code 0; transferred 512/512
> usb-storage: -- transfer complete
> usb-storage: Bulk data transfer result 0x0
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0x2b R 0 Stat 0x0
> usb-storage: scsi cmd done, result=0x0
> usb-storage: *** thread sleeping.
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Command READ_10 (10 bytes)
> usb-storage:  28 00 00 ab 97 7d 00 00 06 00
> usb-storage: Bulk Command S 0x43425355 T 0x2c L 3072 F 128 Trg 0 LUN 0 CL 10
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: usb_stor_bulk_transfer_sglist: xfer 3072 bytes, 1 entries
> usb-storage: Status code 0; transferred 3072/3072
> usb-storage: -- transfer complete
> usb-storage: Bulk data transfer result 0x0
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0x2c R 0 Stat 0x0
> usb-storage: scsi cmd done, result=0x0
> usb-storage: *** thread sleeping.
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Command READ_10 (10 bytes)
> usb-storage:  28 00 00 ab 96 bb 00 00 01 00
> usb-storage: Bulk Command S 0x43425355 T 0x2d L 512 F 128 Trg 0 LUN 0 CL 10
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries
> usb-storage: Status code 0; transferred 512/512
> usb-storage: -- transfer complete
> usb-storage: Bulk data transfer result 0x0
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0x2d R 0 Stat 0x0
> usb-storage: scsi cmd done, result=0x0
> usb-storage: *** thread sleeping.
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Command READ_10 (10 bytes)
> usb-storage:  28 00 00 ab 96 bc 00 00 01 00
> usb-storage: Bulk Command S 0x43425355 T 0x2e L 512 F 128 Trg 0 LUN 0 CL 10
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries
> usb-storage: Status code 0; transferred 512/512
> usb-storage: -- transfer complete
> usb-storage: Bulk data transfer result 0x0
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0x2e R 0 Stat 0x0
> usb-storage: scsi cmd done, result=0x0
> usb-storage: *** thread sleeping.
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Command READ_10 (10 bytes)
> usb-storage:  28 00 00 ab 96 bd 00 00 06 00
> usb-storage: Bulk Command S 0x43425355 T 0x2f L 3072 F 128 Trg 0 LUN 0 CL 10
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: usb_stor_bulk_transfer_sglist: xfer 3072 bytes, 1 entries
> usb-storage: Status code 0; transferred 3072/3072
> usb-storage: -- transfer complete
> usb-storage: Bulk data transfer result 0x0
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0x2f R 0 Stat 0x0
> usb-storage: scsi cmd done, result=0x0
> usb-storage: *** thread sleeping.
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Command READ_10 (10 bytes)
> usb-storage:  28 00 00 ab 97 ab 00 00 01 00
> usb-storage: Bulk Command S 0x43425355 T 0x30 L 512 F 128 Trg 0 LUN 0 CL 10
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries
> usb-storage: Status code 0; transferred 512/512
> usb-storage: -- transfer complete
> usb-storage: Bulk data transfer result 0x0
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0x30 R 0 Stat 0x0
> usb-storage: scsi cmd done, result=0x0
> usb-storage: *** thread sleeping.
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Command READ_10 (10 bytes)
> usb-storage:  28 00 00 ab 97 ac 00 00 01 00
> usb-storage: Bulk Command S 0x43425355 T 0x31 L 512 F 128 Trg 0 LUN 0 CL 10
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries
> usb-storage: Status code 0; transferred 512/512
> usb-storage: -- transfer complete
> usb-storage: Bulk data transfer result 0x0
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0x31 R 0 Stat 0x0
> usb-storage: scsi cmd done, result=0x0
> usb-storage: *** thread sleeping.
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Command READ_10 (10 bytes)
> usb-storage:  28 00 00 ab 97 ad 00 00 06 00
> usb-storage: Bulk Command S 0x43425355 T 0x32 L 3072 F 128 Trg 0 LUN 0 CL 10
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: usb_stor_bulk_transfer_sglist: xfer 3072 bytes, 1 entries
> usb-storage: Status code 0; transferred 3072/3072
> usb-storage: -- transfer complete
> usb-storage: Bulk data transfer result 0x0
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0x32 R 0 Stat 0x0
> usb-storage: scsi cmd done, result=0x0
> usb-storage: *** thread sleeping.
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Command READ_10 (10 bytes)
> usb-storage:  28 00 00 ab 96 2b 00 00 01 00
> usb-storage: Bulk Command S 0x43425355 T 0x33 L 512 F 128 Trg 0 LUN 0 CL 10
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries
> usb-storage: Status code 0; transferred 512/512
> usb-storage: -- transfer complete
> usb-storage: Bulk data transfer result 0x0
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0x33 R 0 Stat 0x0
> usb-storage: scsi cmd done, result=0x0
> usb-storage: *** thread sleeping.
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Command READ_10 (10 bytes)
> usb-storage:  28 00 00 ab 96 2c 00 00 01 00
> usb-storage: Bulk Command S 0x43425355 T 0x34 L 512 F 128 Trg 0 LUN 0 CL 10
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries
> usb-storage: Status code 0; transferred 512/512
> usb-storage: -- transfer complete
> usb-storage: Bulk data transfer result 0x0
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0x34 R 0 Stat 0x0
> usb-storage: scsi cmd done, result=0x0
> usb-storage: *** thread sleeping.
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Command READ_10 (10 bytes)
> usb-storage:  28 00 00 ab 96 2d 00 00 06 00
> usb-storage: Bulk Command S 0x43425355 T 0x35 L 3072 F 128 Trg 0 LUN 0 CL 10
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: usb_stor_bulk_transfer_sglist: xfer 3072 bytes, 1 entries
> usb-storage: Status code 0; transferred 3072/3072
> usb-storage: -- transfer complete
> usb-storage: Bulk data transfer result 0x0
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0x35 R 0 Stat 0x0
> usb-storage: scsi cmd done, result=0x0
> usb-storage: *** thread sleeping.
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Command READ_10 (10 bytes)
> usb-storage:  28 00 01 6f b2 d4 00 00 08 00
> usb-storage: Bulk Command S 0x43425355 T 0x36 L 4096 F 128 Trg 0 LUN 0 CL 10
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
> usb-storage: Status code 0; transferred 4096/4096
> usb-storage: -- transfer complete
> usb-storage: Bulk data transfer result 0x0
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0x36 R 0 Stat 0x0
> usb-storage: scsi cmd done, result=0x0
> usb-storage: *** thread sleeping.
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Command READ_10 (10 bytes)
> usb-storage:  28 00 01 6f b2 9c 00 00 08 00
> usb-storage: Bulk Command S 0x43425355 T 0x37 L 4096 F 128 Trg 0 LUN 0 CL 10
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
> usb-storage: Status code 0; transferred 4096/4096
> usb-storage: -- transfer complete
> usb-storage: Bulk data transfer result 0x0
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0x37 R 0 Stat 0x0
> usb-storage: scsi cmd done, result=0x0
> usb-storage: *** thread sleeping.
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Command READ_10 (10 bytes)
> usb-storage:  28 00 01 6f b1 dc 00 00 08 00
> usb-storage: Bulk Command S 0x43425355 T 0x38 L 4096 F 128 Trg 0 LUN 0 CL 10
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
> usb-storage: Status code 0; transferred 4096/4096
> usb-storage: -- transfer complete
> usb-storage: Bulk data transfer result 0x0
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0x38 R 0 Stat 0x0
> usb-storage: scsi cmd done, result=0x0
> usb-storage: *** thread sleeping.
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Command READ_10 (10 bytes)
> usb-storage:  28 00 01 6f b2 cc 00 00 08 00
> usb-storage: Bulk Command S 0x43425355 T 0x39 L 4096 F 128 Trg 0 LUN 0 CL 10
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
> usb-storage: Status code 0; transferred 4096/4096
> usb-storage: -- transfer complete
> usb-storage: Bulk data transfer result 0x0
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0x39 R 0 Stat 0x0
> usb-storage: scsi cmd done, result=0x0
> usb-storage: *** thread sleeping.
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Command READ_10 (10 bytes)
> usb-storage:  28 00 01 6f b1 4c 00 00 08 00
> usb-storage: Bulk Command S 0x43425355 T 0x3a L 4096 F 128 Trg 0 LUN 0 CL 10
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
> usb-storage: Status code 0; transferred 4096/4096
> usb-storage: -- transfer complete
> usb-storage: Bulk data transfer result 0x0
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0x3a R 0 Stat 0x0
> usb-storage: scsi cmd done, result=0x0
> usb-storage: *** thread sleeping.
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Command READ_10 (10 bytes)
> usb-storage:  28 00 00 7a 50 9f 00 00 08 00
> usb-storage: Bulk Command S 0x43425355 T 0x3b L 4096 F 128 Trg 0 LUN 0 CL 10
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
> usb-storage: Status code 0; transferred 4096/4096
> usb-storage: -- transfer complete
> usb-storage: Bulk data transfer result 0x0
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0x3b R 0 Stat 0x0
> usb-storage: scsi cmd done, result=0x0
> usb-storage: *** thread sleeping.
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Command READ_10 (10 bytes)
> usb-storage:  28 00 00 7a 52 27 00 00 08 00
> usb-storage: Bulk Command S 0x43425355 T 0x3c L 4096 F 128 Trg 0 LUN 0 CL 10
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
> usb-storage: Status code 0; transferred 4096/4096
> usb-storage: -- transfer complete
> usb-storage: Bulk data transfer result 0x0
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0x3c R 0 Stat 0x0
> usb-storage: scsi cmd done, result=0x0
> usb-storage: *** thread sleeping.