KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2014 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-CURRENT #0: Fri Jan 24 13:54:49 JST 2014
    root@free10:/src/FreeBSD/obj/arm.armv6/media/temp/usr/home/sato/work/src/raspi/head/sys/RPI-B arm
FreeBSD clang version 3.3 (tags/RELEASE_33/final 183502) 20130610
CPU: ARM1176JZ-S rev 7 (ARM11J core)
 Supported features: ARM_ISA THUMB2 JAZELLE ARMv4 Security_Ext
 WB enabled LABT branch prediction enabled
  16KB/32B 4-way instruction cache
  16KB/32B 4-way write-back-locking-C data cache
real memory  = 536870912 (512 MB)
avail memory = 385273856 (367 MB)
random: <Software, Yarrow> initialized
kbd0 at kbdmux0
nexus0: <Open Firmware Nexus device>
simplebus0: <Flattened device tree simple bus> mem 0x20000000-0x20ffffff on nexus0
intc0: <BCM2835 Interrupt Controller> mem 0x2000b200-0x2000b3ff on simplebus0
systimer0: <BCM2835 System Timer> mem 0x20003000-0x20003fff irq 8,9,10,11 on simplebus0
Event timer "BCM2835 Event Timer 3" frequency 1000000 Hz quality 1000
Timecounter "BCM2835 Timecounter" frequency 1000000 Hz quality 1000
bcmwd0: <BCM2708/2835 Watchdog> mem 0x2010001c-0x20100027 on simplebus0
gpio0: <BCM2708/2835 GPIO controller> mem 0x20200000-0x202000af irq 57,59,58,60 on simplebus0
gpio0: read-only pins: 46,47,48,49,50,51,52,53.
gpio0: reserved pins: 48,49,50,51,52,53.
gpioc0: <GPIO controller> on gpio0
gpiobus0: <GPIO bus> on gpio0
iichb0: <BCM2708/2835 BSC controller> mem 0x20205000-0x2020501f irq 61 on simplebus0
iicbus0: <OFW I2C bus> on iichb0
iic0: <I2C generic I/O> on iicbus0
iichb1: <BCM2708/2835 BSC controller> mem 0x20804000-0x2080401f irq 61 on simplebus0
iicbus1: <OFW I2C bus> on iichb1
iic1: <I2C generic I/O> on iicbus1
spi0: <BCM2708/2835 SPI controller> mem 0x20204000-0x2020401f irq 62 on simplebus0
spibus0: <OFW SPI bus> on spi0
bcm_dma0: <BCM2835 DMA Controller> mem 0x20007000-0x20007fff,0x20e05000-0x20e05fff irq 24,25,26,27,28,29,30,31,32,33,34,35,36 on simplebus0
mbox0: <BCM2835 VideoCore Mailbox> mem 0x2000b880-0x2000b8bf irq 1 on simplebus0
sdhci_bcm0: <Broadcom 2708 SDHCI controller> mem 0x20300000-0x203000ff irq 70 on simplebus0
mmc0: <MMC/SD bus> on sdhci_bcm0
uart0: <PrimeCell UART (PL011)> mem 0x20201000-0x20201fff irq 65 on simplebus0
uart0: console (115200,n,8,1)
dwcotg0: <DWC OTG 2.0 integrated USB controller> mem 0x20980000-0x2099ffff irq 17 on simplebus0
usbus0 on dwcotg0
fb0: <BCM2835 VT framebuffer driver> on nexus0
simplebus1: <Flattened device tree simple bus> on nexus0
Timecounters tick every 10.000 msec
usbus0: 480Mbps High Speed USB v2.0
ugen0.1: <DWCOTG> at usbus0
uhub0: <DWCOTG OTG Root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
uhub0: 1 port with 1 removable, self powered
mmcsd0: 2GB <SD SD02G 3.0 SN 2095340974 MFG 02/2013 by 39 PH> at mmc0 25.0MHz/4bit/65535-block
fb0: 1680x1050(0x0@0,0) 16bpp
fb0: pitch 3360, base 0x58006000, screen_size 3548160
fbd0 on fb0
vt_allocate: VT initialize with new VT driver.
random: unblocking device.
Root mount waiting for: usbus0
ugen0.2: <vendor 0x0424> at usbus0
uhub1: <vendor 0x0424 product 0x9512, class 9/0, rev 2.00/2.00, addr 2> on usbus0
uhub1: MTT enabled
Root mount waiting for: usbus0
uhub1: 3 ports with 2 removable, self powered
ugen0.3: <vendor 0x0424> at usbus0
smsc0: <vendor 0x0424 product 0xec00, rev 2.00/2.00, addr 3> on usbus0
smsc0: chip 0xec00, rev. 0002
miibus0: <MII bus> on smsc0
ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0
ukphy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ue0: <USB Ethernet> on smsc0
ue0: Ethernet address: b8:27:eb:d1:da:de
Root mount waiting for: usbus0
Root mount waiting for: usbus0
ugen0.4: <Chicony> at usbus0
ukbd0: <Chicony USB Keyboard, class 0/0, rev 2.00/1.44, addr 4> on usbus0
kbd1 at ukbd0
Trying to mount root from ufs:/dev/mmcsd0s2a [rw,noatime]...
warning: no time-of-day clock registered, system time will not be set accurately
smsc0: chip 0xec00, rev. 0002