Script started on 2018-06-29 15:58:09+0900 $ kermit C-Kermit 9.0.302 OPEN SOURCE:, 20 Aug 2011, for Linux+SSL+KRB5 (64-bit) Copyright (C) 1985, 2011, Trustees of Columbia University in the City of New York. Type ? or HELP for help. ($HOST) C-Kermit>connect Connecting to /dev/ttyUSB0, speed 115200 Escape character: Ctrl-\ (ASCII 28, FS): enabled Type the escape character followed by C to get back, or followed by ? to see other options. ---------------------------------------------------- U-Boot 2017.01 (Apr 06 2018 - 16:04:24 +0000) DRAM: 948 MiB RPI 3 Model B (0xa02082) MMC: bcm2835_sdhci: 0 reading uboot.env ** Unable to read "uboot.env" from mmc0:1 ** Using default environment In: serial Out: lcd Err: lcd Net: Net Initialization Skipped No ethernet found. starting USB... USB0: Core Release: 2.80a scanning bus 0 for devices... 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found Hit any key to stop autoboot: 2 1 0 switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... Found EFI removable media binary efi/boot/bootaa64.efi reading efi/boot/bootaa64.efi 83416 bytes read in 33 ms (2.4 MiB/s) ## Starting EFI application at 01000000 ... Scanning disks on usb... Scanning disks on mmc... Adding logical partition Adding logical partition MMC Device 1 not found MMC Device 2 not found MMC Device 3 not found Found 7 disks >> FreeBSD EFI boot block Loader path: /boot/loader.efi Initializing modules: ZFS UFS Probing 3 block devices.....* done ZFS found no pools UFS found 1 partition Consoles: EFI console Command line arguments: loader.efi Image base: 0x37dac008 EFI version: 2.05 EFI Firmware: Das U-boot (rev 0.00) FreeBSD/arm64 EFI loader, Revision 1.1 (Fri Jun 29 14:27:35 JST 2018 root@$PARENT) BootCurrent: 0000 BootOrder: 0000[*] 0000[*] 0000[*] 0000[*] ec50 3af2 0000[*] 0000[*] 2a48 3b36 0000[*] 0000[*] eba0 3af2 0000[*] 0000[*] 6dcc 3b36 0000[*] 0000[*] 0000[*] 0000[*] 0000[*] 0000[*] 0004 0000[*] 0000[*] 0000[*] 5a40 3b38 0000[*] 0000[*] ec08 3af2 0000[*] 0000[*] 28ec 3b36 0000[*] 0000[*] 1c03 005f 0000[*] 0000[*] ebe0 3af2 0000[*] 0000[*] 6dcc 3b36 0000[*] 0000[*] fe90 3af3 0000[*] 0000[*] 0004 0000[*] 0000[*] 0000[*] 5a40 3b38 0000[*] 0000[*] ec48 3af2 0000[*] 0000[*] 28ec 3b36 0000[*] 0000[*] 0068 0000[*] 0000[*] 0000[*] fe90 3af3 0000[*] 0000[*] 5000 3b38 0000[*] 0000[*] ecf0 3af2 0000[*] 0000[*] 2a48 3b36 0000[*] 0000[*] 5a40 3b38 0000[*] 0000[*] 4000 37d4 0000[*] 0000[*] Setting currdev to disk0p2: Loading /boot/defaults/loader.conf /boot/kernel/kernel text=0x8a0cfb data=0x13ee50+0x7d3cfc -syms=[0x8+0x11bc08+0x8+0x10cdaf] Hit [Enter] to boot immediately, or any other key for command prompt. Booting [/boot/kernel/kernel] in 9 seconds... Booting [/boot/kernel/kernel] in 8 seconds... Booting [/boot/kernel/kernel] in 7 seconds... Booting [/boot/kernel/kernel] in 6 seconds... Booting [/boot/kernel/kernel] in 5 seconds... Booting [/boot/kernel/kernel] in 4 seconds... Booting [/boot/kernel/kernel] in 3 seconds... Booting [/boot/kernel/kernel] in 2 seconds... Booting [/boot/kernel/kernel] in 1 second... Booting [/boot/kernel/kernel]... Using DTB provided by EFI at 0x8004000. KDB: debugger backends: ddb KDB: current backend: ddb Copyright (c) 1992-2018 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.0-CURRENT #0 r335788: Fri Jun 29 14:27:10 JST 2018 root@$PARENT:$DIR/work/crochet/work/obj$DIR/work/src/arm64.aarch64/sys/GENERIC arm64 FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0) WARNING: WITNESS option enabled, expect reduced performance. VT: init without driver. Starting CPU 1 (1) Starting CPU 2 (2) Starting CPU 3 (3) FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs arc4random: no preloaded entropy cache random: entropy device external interface MAP 39f1a000 mode 2 pages 1 MAP 3b386000 mode 2 pages 2 MAP 3f100000 mode 1 pages 1 kbd0 at kbdmux0 ofwbus0: simplebus0: on ofwbus0 ofw_clkbus0: on ofwbus0 clk_fixed0: on ofw_clkbus0 clk_fixed1: on ofw_clkbus0 regfix0: on ofwbus0 regfix1: on ofwbus0 psci0: on ofwbus0 local_intc0: mem 0x40000000-0x400000ff on simplebus0 intc0: mem 0x7e00b200-0x7e00b3ff irq 20 on simplebus0 gpio0: mem 0x7e200000-0x7e2000b3 irq 22,23 on simplebus0 gpiobus0: on gpio0 generic_timer0: irq 0,1,2,3 on ofwbus0 Timecounter "ARM MPCore Timecounter" frequency 19200000 Hz quality 1000 Event timer "ARM MPCore Eventtimer" frequency 19200000 Hz quality 1000 bcm_dma0: mem 0x7e007000-0x7e007eff irq 4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19 on simplebus0 bcmwd0: mem 0x7e100000-0x7e100027 on simplebus0 bcmrng0: mem 0x7e104000-0x7e10400f on simplebus0 mbox0: mem 0x7e00b880-0x7e00b8bf irq 21 on simplebus0 gpioc0: on gpio0 uart0: mem 0x7e201000-0x7e201fff irq 24 on simplebus0 uart0: console (115200,n,8,1) spi0: mem 0x7e204000-0x7e204fff irq 26 on simplebus0 spibus0: on spi0 spibus0: at cs 0 mode 0 spibus0: at cs 1 mode 0 iichb0: mem 0x7e804000-0x7e804fff irq 37 on simplebus0 bcm283x_dwcotg0: mem 0x7e980000-0x7e98ffff,0x7e006000-0x7e006fff irq 43,44 on simplebus0 usbus0 on bcm283x_dwcotg0 sdhci_bcm0: mem 0x7e300000-0x7e3000ff irq 46 on simplebus0 mmc0: on sdhci_bcm0 fb0: on simplebus0 fbd0 on fb0 VT: initialize with new VT driver "fb". fb0: 1280x1024(1280x1024@0,0) 24bpp fb0: fbswap: 1, pitch 3840, base 0x3e83a000, screen_size 3932160 pmu0: irq 50 on simplebus0 cpulist0: on ofwbus0 cpu0: on cpulist0 bcm2835_cpufreq0: on cpu0 cpu1: on cpulist0 cpu2: on cpulist0 cpu3: on cpulist0 gpioled0: on ofwbus0 gpioled0: failed to map pin gpioled0: failed to map pin cryptosoft0: Timecounters tick every 1.000 msec usbus0: 480Mbps High Speed USB v2.0 iicbus0: on iichb0 iic0: on iicbus0 ugen0.1: at usbus0 uhub0: on usbus0 mmcsd0: 16GB at mmc0 50.0MHz/4bit/65535-block bcm2835_cpufreq0: ARM 600MHz, Core 250MHz, SDRAM 400MHz, Turbo OFF mbox0: mbox response error bcm2835_cpufreq0: can't set clock rate (id=8) Release APs...done CPU 0: ARM Cortex-A53 r0p4arc4random: no preloaded entropy cache affinity: 0 Instruction Set Attributes 0 = Instruction Set Attributes 1 = <> Processor Features 0 = Processor Features 1 = <0> Memory Model Features 0 = <4k Granule,64k Granule,MixedEndian,S/NS Mem,16bit ASID,1TB PA> Memory Model Features 1 = <> Memory Model Features 2 = <32b CCIDX,48b VA> Debug Features 0 = <2 CTX Breakpoints,4 Watchpoints,6 Breakpoints,PMUv3,Debug v8> Debug Features 1 = <0> Auxiliary Features 0 = <0> Auxiliary Features 1 = <0> Warning: no time-of-day clock registered, CPU 1: ARM Cortex-A53 r0p4system time will not be set accurately affinity: 1 CPU 2: ARM Cortex-A53 r0p4 affinity: 2 CPU 3: ARM Cortex-A53 r0p4 affinity: 3 WARNING: WITNESS option enabled, expect reduced performance. arc4random: no preloaded entropy cache uhub0: 1 port with 1 removable, self powered arc4random: no preloaded entropy cache Growing root partition to fill device ugen0.2: at usbus0 uhub1 on uhub0 uhub1: on usbus0 uhub1: MTT enabled GEOM_PART: mmcsd0s2 was automatically resized. Use `gpart commit mmcsd0s2` to save changes or `gpart undo mmcsd0s2` to revert them. mmcsd0s2 resized mmcsd0s2a resized gpart: arg0 'mmcsd0s2a': Invalid argument super-block backups (for fsck_ffs -b #) at: 16669312, 17951552, 19233792, 20516032, 21798272, 23080512, 24362752, 25644992, 26927232, 28209472, 29491712 uhub1: 5 ports with 4 removable, self powered Setting hostuuid: 30303030-3030-3030-6161-386132396565. Setting hostid: 0x77d6b670. ugen0.3: at usbus0 smsc0 on uhub1 smsc0: on usbus0 smsc0: chip 0xec00, rev. 0002 No suitable dump device was found. miibus0: on smsc0 smscphy0: PHY 1 on miibus0 smscphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ue0: on smsc0 ue0: Ethernet address: b8:27:eb:8a:29:ee Starting file system checks: /dev/mmcsd0s2a: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/mmcsd0s2a: clean, 2451335 free (1295 frags, 306255 blocks, 0.0% fragmentation) Mounting local filesystems:random: unblocking device. . ELF ldconfig path: /lib /usr/lib /usr/lib/compat Building /boot/kernel/linker.hints lock order reversal: 1st 0xffff000040c64918 bufwait (bufwait) @ $DIR/work/src/sys/kern/vfs_bio.c:3916 2nd 0xfffffd00017d9000 dirhash (dirhash) @ $DIR/work/src/sys/ufs/ufs/ufs_dirhash.c:289 stack backtrace: #0 0xffff0000003eb5e4 at witness_debugger+0x64 #1 0xffff00000038f2cc at _sx_xlock+0x7c #2 0xffff0000006124d4 at ufsdirhash_add+0x38 #3 0xffff000000614f68 at ufs_direnter+0x3b0 #4 0xffff00000061bcfc at ufs_rename+0xc90 #5 0xffff0000006cff10 at VOP_RENAME_APV+0xb4 #6 0xffff00000045b1e0 at kern_renameat+0x33c #7 0xffff000000697128 at do_el0_sync+0x4b0 #8 0xffff00000067d9f0 at handle_el0_sync+0x74 Setting hostname: $HOST. Setting up harvesting: [UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,NET_ETHER,NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED Feeding entropy: . lo0: link state changed to UP smsc0: chip 0xec00, rev. 0002 ue0: link state changed to DOWN ue0: link state changed to UP Starting Network: lo0 ue0. lo0: flags=8049 metric 0 mtu 16384 options=680003 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 inet 127.0.0.1 netmask 0xff000000 groups: lo nd6 options=21 ue0: flags=8843 metric 0 mtu 1500 options=80009 ether XX:XX:XX:XX:XX:XX media: Ethernet autoselect (100baseTX ) status: active nd6 options=29 Starting devd. Starting dhclient. DHCPDISCOVER on ue0 to 255.255.255.255 port 67 interval 8 DHCPOFFER from $DHCP_SERVER DHCPREQUEST on ue0 to 255.255.255.255 port 67 DHCPACK from $DHCP_SERVER bound to $LOCAL_IP -- renewal in 129600 seconds. add host 127.0.0.1: gateway lo0 fib 0: route already in table add host ::1: gateway lo0 fib 0: route already in table add net fe80::: gateway ::1 add net ff02::: gateway ::1 add net ::ffff:0.0.0.0: gateway ::1 add net ::0.0.0.0: gateway ::1 Generating host.conf. Creating and/or trimming log files. Starting syslogd. Clearing /tmp (X related). Updating motd:. Mounting late filesystems:. Starting ntpd. Starting powerd. Jun 29 06:10:43 $HOST ntpd[797]: leapsecond file ('/var/db/ntpd.leap-seconds.list'): expired less than 184 days ago Configuring vt: blanktime. Generating RSA host key. 2048 SHA256:BUsBQc12HwzuZ3TOuVg+YlXhQHL0ucv/ZZq56nZxn2Y root@$HOST (RSA) Generating ECDSA host key. 256 SHA256:cELlzCC0qiUnRxWQzjCDiK4p0jIzSuulWhc/huIojgY root@$HOST (ECDSA) Generating ED25519 host key. 256 SHA256:EH/luwUUfqk0qjM5wMzgwD7PEX7RY9wJIk/X1utWQS4 root@$HOST (ED25519) Performing sanity check on sshd configuration. Starting sshd. Starting cron. Starting background file system checks in 60 seconds. Fri Jun 29 06:10:46 UTC 2018 FreeBSD/arm64 ($HOST) (ttyu0) login: pi Password: FreeBSD 12.0-CURRENT (GENERIC) #0 r335788: Fri Jun 29 14:27:10 JST 2018 Welcome to FreeBSD! Release Notes, Errata: https://www.FreeBSD.org/releases/ Security Advisories: https://www.FreeBSD.org/security/ FreeBSD Handbook: https://www.FreeBSD.org/handbook/ FreeBSD FAQ: https://www.FreeBSD.org/faq/ Questions List: https://lists.FreeBSD.org/mailman/listinfo/freebsd-questions/ FreeBSD Forums: https://forums.FreeBSD.org/ Documents installed with the system are in the /usr/local/share/doc/freebsd/ directory, or can be installed later with: pkg install en-freebsd-doc For other languages, replace "en" with a language code like de or fr. Show the version of FreeBSD installed: freebsd-version ; uname -a Please include that output and any error messages when posting questions. Introduction to manual pages: man man FreeBSD directory layout: man hier Edit /etc/motd to change this login announcement. % df -h Filesystem Size Used Avail Capacity Mounted on /dev/mmcsd0s2a 14G 4.9G 8.2G 37% / devfs 1.0K 1.0K 0B 100% /dev /dev/mmcsd0s1 50M 13M 37M 27% /boot/efi /dev/md0 48M 24K 44M 0% /tmp /dev/md1 14M 64K 13M 0% /var/log /dev/md2 11M 8.0K 10M 0% /var/tmp % su - Jun 29 07:12:36 $HOST su[900]: pi to root on /dev/ttyu0 78root@$HOST:~ # sudo poweroff sudo: Command not found. root@$HOST:~ # poweroff Shutdown NOW! poweroff: [pid 905] root@$HOST:~ # *Stopping cron. Waiting for PIDS: 838. Stopping sshd. Waiting for PIDS: 834. Stopping powerd. Waiting for PIDS: 800. Stopping ntpd. Waiting for PIDS: 797, 797. Stopping devd. Waiting for PIDS: 563. Writing entropy file:. Writing early boot entropy file:. . Jun 29 07:12:48 $HOST syslogd: exiting on signal 15 Waiting (max 60 seconds) for system process `vnlru' to stop... done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining... 6 3 2 1 0 0 done Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done All buffers synced. lock order reversal: 1st 0xfffffd0001471d88 ufs (ufs) @ $DIR/work/src/sys/kern/vfs_mount.c:1343 2nd 0xfffffd0005911ba8 syncer (syncer) @ $DIR/work/src/sys/kern/vfs_subr.c:2734 stack backtrace: #0 0xffff0000003eb5e4 at witness_debugger+0x64 #1 0xffff00000035bf80 at lockmgr_lock_fast_path+0x190 #2 0xffff0000006d0c58 at VOP_LOCK1_APV+0xac #3 0xffff00000045e050 at _vn_lock+0x64 #4 0xffff00000044ed2c at vputx+0x154 #5 0xffff000000447004 at dounmount+0x4f0 #6 0xffff000000450420 at vfs_unmountall+0x7c #7 0xffff00000042de40 at bufshutdown+0x298 #8 0xffff00000038675c at kern_reboot+0x244 #9 0xffff0000003864ac at sys_reboot+0x354 #10 0xffff000000697128 at do_el0_sync+0x4b0 #11 0xffff00000067d9f0 at handle_el0_sync+0x74 lock order reversal: 1st 0xfffffd0001471d88 ufs (ufs) @ $DIR/work/src/sys/kern/vfs_mount.c:1343 2nd 0xfffffd0001471ba8 devfs (devfs) @ $DIR/work/src/sys/ufs/ffs/ffs_vfsops.c:1371 stack backtrace: #0 0xffff0000003eb5e4 at witness_debugger+0x64 #1 0xffff00000035bf80 at lockmgr_lock_fast_path+0x190 #2 0xffff0000006d0c58 at VOP_LOCK1_APV+0xac #3 0xffff00000045e050 at _vn_lock+0x64 #4 0xffff000000609910 at ffs_flushfiles+0x88 #5 0xffff0000005efdb8 at softdep_flushfiles+0x84 #6 0xffff00000060bb24 at ffs_unmount+0x6c #7 0xffff000000447050 at dounmount+0x53c #8 0xffff000000450420 at vfs_unmountall+0x7c #9 0xffff00000042de40 at bufshutdown+0x298 #10 0xffff00000038675c at kern_reboot+0x244 #11 0xffff0000003864ac at sys_reboot+0x354 #12 0xffff000000697128 at do_el0_sync+0x4b0 #13 0xffff00000067d9f0 at handle_el0_sync+0x74 Uptime: 1m16s (Back at $HOST) ---------------------------------------------------- ($HOME) C-Kermit>exit Closing /dev/ttyUSB0...OK $ exit exit Script done on 2018-06-29 16:13:06+0900